Root Samsung Galaxy SL i9003 on Gingerbread 2.3.6 DDKP3 firmware

Today we bring you a tutorial so that you can get root access to your Samsung Galaxy SL i9003 on Android Gingerbread 2.3.6 DDKP3 firmware.
Before start, you should check that your phone has the firmware 2.3.6 DDKP3. To do this you must follow this path: Settings> About Phone> Firmware Version , which should say DDKP3 Gingerbread 2.3.6.
Prerequisites:
We recommend that you back up all your data before starting the process. Do not do the backup with KIES as it creates the backup in the format (.SBU) which is usually has restoration problems being a custom firmware ROM.
It is therefore advisable to perform the backup of all data as follows:

• SMS – Use SMS Backup & Restore
• Contacts – Sync to Gmail application
• Pictures, songs, videos and files – Copy to SD card
• To note the APN and MMS settings from Applications -> Settings -> Wireless & Networks -> Mobile networks -> APN

Make sure all security suites and firewalls, antivirus and application KIES closed completely until firmware update finishes.
Your phone must have a minimum of 60% of battery to ensure that the update will not be interrupted.
Never interrupt the firmware update manually, by the way, if interrupted by power failure there is no need to worry because all you have to do is follow the instructions only from the beginning.
It is very important to make sure you have ADMIN privileges before proceeding to update the phone. You must also enable the USB Debugging which means that you have read/write the firmware can be applied successfully. To do this go to Settings -> Applications -> Development -> USB Debugging. Note that the phone must be disconnected from the computer when you perform this step.

It should be noted that Androidlot.com is not responsible for any damage that may occur to the device during this process.

Root Samsung Galaxy SL i9003 on Gingerbread 2.3.6 DDKP3 firmware
1) Download the root package from this link to your computer and extract the files. You should see these two files.

2) Then you open the executable file Odin on your PC and switch off your Galaxy SL I9003 to enter in the download mode.
3) To do this you must press the Volume Down + Center button, then hold both, simultaneously press Power. Then you should see a green robot indicates that you entered into download mode.
4) Once your Galaxy SL is in download mode, you connect the phone to computer via the USB cable original, while Odin’s running on your computer. There you will see that Section ID: COM yellow lights.

If ID: COM does not get yellow, two things can happen:

• Need to install USB drivers for your phone on the PC
• You must go to Settings -> Wireless & Network -> USB Settings and make sure that the “Samsung KIES” is checked before connecting your phone to your computer.

5) Once ID: COM is in yellow, PDA you select the file “DDKP3-cfroot-12-02-2012″ as shown in the image and click “Start” to start the process.
6) After you have rooted, the device will automatically restarts. When you see the screen, you should disconnect the USB cable to turn off the device to get into recovery mode. To do this you must press the Volume Up + Home button, then hold both simultaneously press the power button.
7) In recovery mode, select Wipe data/factory reset and Wipe Cache partition and then reboot the phone by selecting Reboot system now with the help of the volume keys to scroll.
Ready! You will have gained root access to your Samsung Galaxy SL i9003 Android Gingerbread 2.3.6 DDKP3 firmware.